Turbo for GT1849V suitable for Nissan Almera Di 2.2L YD22ED/ YD1 14411AW400 727477-5006
Turbo for GT1849V suitable for Nissan Almera Di 2.2L YD22ED/ YD1 14411AW400 727477-5006
- ✓ Price includes VAT — no surprises later
- ✓ Fast shipping from our own stock
- ✓ 100% new, aftermarket in OE quality
- ✓ 2-year warranty against manufacturing defects
Product Description
Turbocharger (GTA1849V) for various Nissan models with 2.2L diesel engine.
Suitable for:
- Nissan Almera Di 2.2L D YD22ED/YD1 2003
- Nissan Primera dCi 2.2L D YD22ED/YD22DDTI 2003-2005
- Nissan X-Trail Di 2.2L D YD1/YD22DDTi 2002-
- Nissan Almera Tino SE dCi 2.2L D YD22DDTI 2003-2005
Please note: suitable for inlet scroll with 3-bolt connection. Only suitable for Nissan X-Trail 2.2L with 136hp; if your model has 2.2L 134hp, compare with part number 750441 (different cooling type and different exhaust flange).
Specifications
- Turbo Model: GTA1849V, for GT1849V
- Engine Code: YD1 HM, YD1, YD22ED
- OEM / Part Number: 725864, 727477, 725864-0001, 725864-0002, 725864-5001S, 725864-5002S, 727477-0002, 727477-0005, 727477-0006, 727477-0007, 727477-0008, 727477-9006, 727477-5006, 727477-5002S, 727477-5005S, 727477-9006S, 727477-5006S, 727477-5007S, 727477-5008S, 14411AU600, 14411AW400, 14411AW40A, 14411-AU600, 14411-AW400, 14411-AW40A, 14411AW400EP, 14411AW40AEP, 14411AW40AEX, 14411-AW400EP, 14411-AW40AEP, 14411-AW40AEX
- Cooling: Oil Cooling
- Bearing Type: Ball Bearing
- Power: up to 125 hp
- Turbine Inducer Diameter: 44 mm
- Turbine Exducer Diameter: 39.85 mm
- Turbine Trim: 82.0
- Compressor Inducer Diameter: 36.2 mm
- Compressor Exducer Diameter: 48.9 mm
- Compressor Trim: 54.8
- Axial Bearing: 270 degrees
- Condition: Brand New
- Warranty: 1-year warranty against manufacturing defects
Features
- 100% balancing test by TURBOTECHNICS VSR3
- G3-min-flow VNT turbo test
- Advanced actuator tester/programmer
- Turbine Housing: QT450-10 cast iron, heat resistant up to 700°C
- Turbine Wheel: special K418 alloy, stable up to 900°C
- Compressor Housing: lightweight ZL104 aluminum
- Compressor Wheel: cast aluminum with good gas tightness and corrosion resistance
Please Note
This part is intended for repairing or overhauling the complete turbo. Please confirm that your old turbo part number matches one of the numbers above.
Check Fitment
Before ordering, always check the original OEM part number, year of manufacture, engine code, and the specific version of your vehicle, as there may be differences per version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchasing.
Product Description
Turbocharger (GTA1849V) for various Nissan models with 2.2L diesel engine.
Suitable for:
- Nissan Almera Di 2.2L D YD22ED/YD1 2003
- Nissan Primera dCi 2.2L D YD22ED/YD22DDTI 2003-2005
- Nissan X-Trail Di 2.2L D YD1/YD22DDTi 2002-
- Nissan Almera Tino SE dCi 2.2L D YD22DDTI 2003-2005
Please note: suitable for inlet scroll with 3-bolt connection. Only suitable for Nissan X-Trail 2.2L with 136hp; if your model has 2.2L 134hp, compare with part number 750441 (different cooling type and different exhaust flange).
Specifications
- Turbo Model: GTA1849V, for GT1849V
- Engine Code: YD1 HM, YD1, YD22ED
- OEM / Part Number: 725864, 727477, 725864-0001, 725864-0002, 725864-5001S, 725864-5002S, 727477-0002, 727477-0005, 727477-0006, 727477-0007, 727477-0008, 727477-9006, 727477-5006, 727477-5002S, 727477-5005S, 727477-9006S, 727477-5006S, 727477-5007S, 727477-5008S, 14411AU600, 14411AW400, 14411AW40A, 14411-AU600, 14411-AW400, 14411-AW40A, 14411AW400EP, 14411AW40AEP, 14411AW40AEX, 14411-AW400EP, 14411-AW40AEP, 14411-AW40AEX
- Cooling: Oil Cooling
- Bearing Type: Ball Bearing
- Power: up to 125 hp
- Turbine Inducer Diameter: 44 mm
- Turbine Exducer Diameter: 39.85 mm
- Turbine Trim: 82.0
- Compressor Inducer Diameter: 36.2 mm
- Compressor Exducer Diameter: 48.9 mm
- Compressor Trim: 54.8
- Axial Bearing: 270 degrees
- Condition: Brand New
- Warranty: 1-year warranty against manufacturing defects
Features
- 100% balancing test by TURBOTECHNICS VSR3
- G3-min-flow VNT turbo test
- Advanced actuator tester/programmer
- Turbine Housing: QT450-10 cast iron, heat resistant up to 700°C
- Turbine Wheel: special K418 alloy, stable up to 900°C
- Compressor Housing: lightweight ZL104 aluminum
- Compressor Wheel: cast aluminum with good gas tightness and corrosion resistance
Please Note
This part is intended for repairing or overhauling the complete turbo. Please confirm that your old turbo part number matches one of the numbers above.
Check Fitment
Before ordering, always check the original OEM part number, year of manufacture, engine code, and the specific version of your vehicle, as there may be differences per version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchasing.