Toyota suspension
Toyota's suspension collection runs from small to colossal: shock absorber mounts and top bearings for the Corolla, Auris, Verso and Aygo, sporty (adjustable) shock absorbers for the Celica, Supra and Camry, wheel bearings for the Hilux, and for the 4x4s — Land Cruiser, Hilux, Tundra, 4Runner, FJ Cruiser and RAV4 — lift kits, raising kits and 6x139.7 wheel spacers.
Hatchback or 4x4: two kinds of maintenance
With the passenger cars it is about quiet wear: a clonk over speed bumps points to sway bar links or control arm bushings, creaking when steering to a top bearing and a growing droning tone to a wheel bearing. Even an indestructible Corolla needs new dampers after a few hundred thousand kilometres — test it with the push-down test on each corner. With the 4x4s, geometry comes into play: if you fit a lift kit to a Hilux or Tundra, check the steering geometry and have the car aligned, and choose wheel spacers with the correct bolt pattern and centre bore. Replace wear parts in axle pairs, left and right together.
Why buy from us: local stock, warranty on manufacturing defects and Netherlands-based customer service.
Also of interest: Toyota coilovers, Toyota air suspension and suspension & springs.
2x Free Wheeling Hub 30 Spline Suitable for Toyota Land Cruiser FJ60 FJ62 BJ60 HJ60 HJ61
FWH-AM43530-69045
Suspension
Suspension & damping
Toyota suspension
Wheel bearings, hubs & spacers
Product descriptionFree-wheeling hub (wheel lock hub), 30-spline, per 2 pieces.Suitable for: Toyota Land Cruiser FJ40, FJ43, FJ45, BJ40, BJ42, BJ45, BJ46, HJ47, 8/1980-4/1986 Toyota...
4x Wheel Spacers 6x139.7mm 30mm suitable for Landcruiser Patrol Pajero Hilux Prado
WS-139.7-30X4-VL
Chevrolet suspension
Dodge suspension
Honda suspension
Kia suspension
Lexus suspension
Mitsubishi suspension
Suspension
Suspension & damping
Toyota suspension
Wheel bearings, hubs & spacers
Product DescriptionSet of 4 wheel spacers (30 mm), bolt pattern 6x139.7 mm, suitable for the listed vehicles.Suitable for: Toyota Land Cruiser 1969-2011, 2013-2014 Toyota...
Rear lift compatible with Toyota Tundra 4WD 2007-2021 shock absorber 495mm
LKG1-TOY0721-R3-NLC
Shock absorbers & struts
Suspension
Suspension & damping
Toyota suspension
New MaXpeedingRods shock absorber, aftermarket in OE quality. From local stock, delivered quickly and with a warranty against manufacturing defects.Application Compatible with Toyota Tundra...
Strut Coil Clamp Spring Compressor Tool Set Kits Extractor Garage suitable for BMW E31
TTK-SPRING
BMW suspension
Car tools
Chrysler suspension
Fiat suspension
Ford suspension
Honda suspension
Land Rover suspension
Mercedes-Benz suspension
Nissan suspension
Opel/Vauxhall suspension
Porsche suspension
Renault suspension
Shock absorbers & struts
Subaru suspension
Suspension
Suspension & damping
Toyota suspension
Volkswagen suspension
Volvo suspension
Product description Spring compressor tool set with interchangeable spring clamps, for safe installation and removal of coil springs on McPherson struts. Suitable for: Mercedes-Benz...
3 Inch Aluminum Lift Kit suitable for Toyota Tundra 2007-2021 before
LSK-TUN0721FR3-VLC
Lift & leveling kits
Lift & leveling kits
Suspension
Suspension & damping
Toyota suspension
Product Description Lift kit with spacers for raising the vehicle, 3" front and rear. Suitable for: Toyota Tundra 2WD 4X4 2007-2021 Specifications Type: lift...
2 pieces Coilover Suspension Top Hat Camber Plates suitable for Toyota Celica 2000-2006
CP-CEL-0005-R-LC
Camber plates & arms
Lift & leveling kits
Lift & leveling kits
Suspension
Suspension & damping
Toyota suspension
Product description Set of 2 strut bearings (top mounts) for the front axle, in red, with adjustable top to set camber independently of caster....
Complete Shock Absorber Suspension suitable for Toyota Corolla E12 E130 2003-2008
COT6-COR-0308-VD
Shock absorbers & struts
Suspension
Suspension & damping
Toyota suspension
Product descriptionComplete adjustable threaded undercarriage set (coilovers).Suitable for: Toyota Corolla 9th generation (E120) (01/2001-12/2007) Toyota Corolla 9th generation (E130) (2003-2008) Toyota Matrix XRS (E130)...
2-4" LIFT TUBULAR UPPER CONTROL ARM fits TOYOTA TUNDRA SEQUOIA 2000-06 07
CAP3-TUN0007-LR-NLC
Control arms & steering knuckles
Suspension
Suspension & damping
Toyota suspension
Product description Set of 2 upper control arms (front) for the Toyota Tundra and Sequoia. Suitable for: Toyota Tundra 2000-2006, 2WD/4WD Toyota Sequoia 2001-2007,...
4x 6 Bolt Wheel Spacer suitable for Toyota HZJ75 Hilux 60S 80S 6x139.7 50mm M12x1.5 new
WS-139.7-50X4
Suspension
Suspension & damping
Toyota suspension
Wheel bearings, hubs & spacers
Product Description Set of 4 wheel spacers, 50mm thick with 6x139.7 bolt pattern, suitable for various 4x4 models. Suitable for: Landcruiser, Patrol, Hilux (4WD)...
Wheel Bearing Tool suitable for Citroen, Opel, Peugeot, Toyota J-0562
TTK-J0562-14
Car tools
Citroën suspension
Opel/Vauxhall suspension
Peugeot suspension
Suspension
Suspension & damping
Toyota suspension
Wheel accessories
Wheel bearings, hubs & spacers
Product Description This wheel bearing tool (J-0562) is designed for installing and removing wheel bearings on various Citroën, Opel, Peugeot, and Toyota vans. Suitable...
For 2in Front 1.5in Rear Full Lift Kits suitable for Toyota RAV4 2006-2018 2012 new
BFLLK-TOY0618-LC
Lift & leveling kits
Lift & leveling kits
Suspension
Suspension & damping
Toyota suspension
Product Description Leveling lift kit (2" front, 1.5" rear) for extra ground clearance, while maintaining original shocks and springs. Suitable for: Toyota RAV4 (2006-2018)...
2x Wheel Spacers 10mm suitable for BMW 3 Series 5 Series Touring 8 Series 5x112 With 10 Bolts
WS-99955X2
BMW suspension
Suspension
Suspension & damping
Toyota suspension
Wheel bearings, hubs & spacers
Product Description This set of 2 hub-centric 10mm wheel spacers is suitable for various BMW models. Suitable for: BMW 3 Series Sedan G20 BMW...