4.1Trustpilot· 600+ reviews
Cylinder kits

Cylinder kits

In this collection you will find cylinder kits and everything that goes with them. For motorcycles, quads and garden tools there are complete top-end kits with cylinder, piston, piston rings and gaskets — including for the Yamaha YZ85, Blaster 200 and Raptor 660R, the Suzuki LT50 and Stihl chainsaws. For cars you will find complete cylinder heads here (such as for the Nissan YD25) and a wide range of clutch cylinders: master and slave cylinders for the VW Passat, Audi A4, BMW, Opel and Honda, among others.

Why always replace the cylinder and piston together?

The cylinder wall, piston and rings wear in against each other. If you fit a new piston in a worn cylinder, the compression will be off and the engine will burn oil. So always replace these parts as a set and fit new gaskets — with our kits everything comes in one box. If the gearbox is hard to disengage and the pedal feels limp, the clutch master or slave cylinder is usually the culprit; check for traces of fluid and, when in doubt, replace both cylinders at the same time.

Why buy from us: local stock, warranty on manufacturing defects and Netherlands-based customer service.

Also of interest: engine internals, gaskets and valvetrain.

 

Cylinder Kit suitable for Suzuki LT 50/ LT A50 49cc (1984–2006) – Piston, Gasket, Cylinder Head, Bearing

(0)
€42,67
CPK-SZK-LT50_H-VL
ATV / UTV / quad Cylinder kits Engine gaskets Motorcycle & powersports
Product Description Cylinder kit (cylinder, piston, and cylinder head) for the engine, suitable as a replacement for original parts. Suitable for: Suzuki LT A50...

Slave Cylinder suitable for Mercedes-Benz Unimog 403 406 407 413 416 417 421

(0)
€21,51
CMC-59507
Clutch & flywheel Clutches & flywheels Cylinder kits Drivetrain & transmission
Product description Clutch slave cylinder for operating the clutch, suitable as a replacement for the original part. Suitable for: Mercedes-Benz Unimog 403 Mercedes-Benz Unimog...

Glow plug thread repair kit 33-piece M8-M14 for cylinder head

(0)
€44,46
TTK-M8M14-33
Cylinder kits Engine & timing tools Tools Tools
Product Description 33-piece thread repair kit for damaged glow plug threads in the cylinder head. Fast and effective repair without removing the head. Made...

Universal turbo T25 0.60 A/R compatible with 1.5L-2.0L 4-cylinder engines up to 350 hp

(0)
€179,34
GGT2871-NPVL
Cylinder kits Turbo & Forced Induction Universal turbos & turbo kits
Product description Universal water-cooled turbocharger with 0.60 A/R compressor for 1.5L-2.0L 4-cylinder engines with T25 flange. New, aftermarket in OE quality. Compatible with: All...

Universal turbo compatible with 4- and 6-cylinder 1.5L-2.5L engines T3 up to 420 hp

(0)
€271,92
GGTT3-NJD
Cylinder kits Turbo & Forced Induction Universal turbos & turbo kits
Product description Universal street turbocharger for 4- and 6-cylinder engines from 1.5L to 2.5L. New, aftermarket in OE quality. Compatible with: All 4- or...

Top-end kit with cylinder, piston and gaskets compatible with Yamaha Blaster 200 YFS200 1988-2006

(0)
€82,16
CPK-YFS200-VL
Cylinder kits Engine gaskets Motorcycle Motorcycle & powersports
Product descriptionComplete top-end rebuild set with cylinder, piston, piston rings and gaskets for the Yamaha Blaster 200. New, aftermarket in OE quality. Please note:...

Universal Billet GT2871 turbo T25 flange up to 350 hp for 1.5-2.0L 4-cylinder engines

(0)
€380,49
GGT2871-NSD
Cylinder kits Turbo & Forced Induction Turbo accessories
Product descriptionUniversal Billet GT2871 racing turbocharger with T25 flange and dual ceramic ball bearing, compatible with all 1.5-2.0L 4-cylinder engines. New, aftermarket in OE...

Cylinder head complete compatible with Nissan Navara NP300 Pathfinder 2.5 dCi YD25 11039EB30A

(0)
€529,17
CH-EB30A-ZC-Z2
Cylinder heads Cylinder heads & valves Cylinder kits Engine & lubrication Engine internals
Product description Complete cylinder head for the 2.5 dCi diesel engine (YD25). New, aftermarket in OE quality, supplied fully assembled. Compatible with: Nissan Cabstar...

Cylinder and piston set with gaskets compatible with Yamaha Raptor 660R 686cc 2001-2005

(0)
€113,46
CPK-YMH-YFM660-VL
Cylinder kits Engine gaskets Motorcycle Motorcycle & powersports
Product description Complete cylinder and piston set with gaskets for the engine overhaul of the Yamaha Raptor 660R (686 cc). New, aftermarket in OE...

Clutch slave and master cylinder compatible with Audi A3 Seat Leon VW Golf IV Bora Skoda Octavia

(0)
€47,93
CMC-1388A_CMC-1261A
Clutch & flywheel Clutches & flywheels Cylinder kits Drivetrain & transmission
Product description Set with clutch slave cylinder (receiver) and master cylinder (sender) for the hydraulic clutch system. New, aftermarket in OE quality. Compatible with:...

Turbo exhaust manifold T3 4-bolt V-Band universal 1.5-2.5L 4/6-cylinder 3002912594

(0)
€249,43
BF-GGTT3_MFTD42-G-Z4
BMW turbos Cylinder kits Exhaust manifolds Ford turbos Intake & exhaust systems Mazda turbos Mercedes-Benz turbos Turbo & Forced Induction Universal turbos & turbo kits Volvo turbos
Product description Universal T3 turbo exhaust manifold with 4-bolt flange and V-Band outlet, compatible with 4- and 6-cylinder petrol and diesel engines from 1.5...

Turbo charge pipe kit 2.5 inch aluminium universal 1.5-2.5L 4/6-cylinder 3002912598

(0)
€347,24
BF-GGTT3_PP-25-18
BMW turbos Cylinder kits Ford turbos Mazda turbos Mercedes-Benz turbos Turbo & Forced Induction Universal turbos & turbo kits Volvo turbos
Product description Universal charge pipe kit made of aluminium, 2.5 inch, for turbo setups on 4- and 6-cylinder engines from 1.5 to 2.5 litres....
Items 1 to 12 of 126 total

Your cart

×