Front Coilovers compatible for VW Golf mk1 Scirocco 1975-1984

Dit MaXpeedingRods onderdeel is geschikt voor Volkswagen-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Introductionma Xpeedingrods' Ma Xpeedingrods-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.Toepassing Geschikt voor VW Rabbit / Geschikt voor Golf MK1(models 1975-1984)Geschikt voor VW Jetta MK1(models 1980-1984)Geschikt voor VW Scirocco MK1(models 1975-1981)Geschikt voor VW Scirocco MK2(models 1982-1989)Specificaties Top mounts: OE top mounts required Damping adjustable: Not available Camber adjustable: Not available Height adjustable: Yes, lowering 0-25mm depending on the vehicle models Spring rate Front: 8 kg/mm (448 lbs/in)Front spring inner diameter: 62 mm Spring length Front: 170 mm Help spring rate Front and rear: 1 kg/mm (56 lbs/in)Help spring length Front and rear: 102 mm Spring Preload advised: 7-10 mm Color: Silver body with red spring Package included Package included：2x Front coil-overs2x C spanners Dimension Package size : 73*26*19 cm Weight: 10600 g Kenmerken1.0-25mm(depends on vehicle models) lower height adjustable2. Dust boot, solid rubber bump stops3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets4. Simple install,Easy to adjust.5. Use the vehicle's original upper mounts (not included in our product kit).Let op1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 3. Impact wrench is prohibited during the installation, it will loosen or damage the product.4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.